Is there crumbling or fading on your driveway? Your driveway's surface can be protected from damage, and its lifespan can be increased with a seal coating treatment. Sealcoating driveways is most commonly done with asphalt, but it is also possible to do it with concrete. The price of seal coating varies depending on the square footage of your driveway, with an average price of about $800 being paid for the service. 

How Does Driveway Sealcoating Work?

The procedure of seal coating a driveway involves applying a protective coating to the surface of a paved driveway to shield it from the damaging effects of the environment and to lengthen the driveway's useful life. The coating is often constructed of asphalt or a similar substance that is resistant to water, ultraviolet radiation, and other environmental variables that might cause damage to the driveway. These elements can all contribute to the deterioration of the driveway. 

The surface must be carefully scrubbed before applying a sealant to a parking lot. After that, any fissures or defects are patched up. After that, using either a paintbrush, a roller, or a sprayer, the material for the seal coat is spread throughout the surface in a uniformly thin layer. For optimal coverage, the material is normally applied in two separate coats during the application process. 

Why Should You Consider Sealcoating Your Driveway? What are the Benefits?

Sealcoating a driveway provides several advantages for the homeowner. To begin, it acts as a shield that prevents the roadway from being damaged by elements such as water, sunshine, and other natural elements. These factors can cause asphalt or concrete to become brittle and crack as a result of their effects. 

In addition to this, it helps to fill in small cracks and defects, which stops water from reaching the surface and inflicting additional damage. 

Last but not least, applying a sealant to a parking lot can spruce up its appearance by giving it a clean, updated aspect. It brings back the deep black color of asphalt and provides concrete roads with a smooth and silky appearance. 

Although the benefits will vary, seal coating will be helpful in the following ways:

• Get rid of the oil spots.
• Put a stop to the water coming in.
• Fill up any minute cracks.
• Surfaces without any bumps
• Bring back the original color of your driveway. 

Is There a Recommended Routine for Driveway Sealing?

Sealcoating should be applied every three to five years, depending on how often your driveway gets used. The precise time, on the other hand, is going to be determined by the quality of your driveway, the weather, and the amount of use that it gets. 

When used on a consistent basis, it has the potential to extend the life of your driveway by ten years or more. In spite of this, it is still a cost-effective method for extending the life of a concrete or asphalt paving driveway that needs to be addressed. 

It is important to do routine inspections of the surface of your driveway to look for any signs of damage or wear. This will help you determine how often your driveway should be sealed and coated. It is possible that it is time to seal the driveway if you find any cracks or other defects in the surface or if the surface appears faded or worn. 

In addition to this, it is a smart move to adhere to the guidelines provided by the manufacturer regarding the amount of time that has passed since the last sealcoating. The instructions provided by the manufacturer will provide the most precise guidance possible for the use of your particular product. The suggested intervals for reapplication of the sealcoating may vary between the various types of sealcoating materials. 

Your driveway may need to be replaced sooner if you live in an area that experiences extreme heat, freezing temperatures, heavy rain, or snow. Additionally, the pavement's vulnerability to cracking, splitting, or spreading might be exacerbated by heavy foot traffic or the parking of automobiles on it. If you put a lot of traffic on your driveway or live in an area with severe weather, consider resealing it every two to three years. 

In general, the more often you seal your driveway, the more it will be protected against damage and the longer it will survive. If you want your driveway to endure longer, seal it more often. On the other hand, excessive sealing can result in an excessive buildup of residue and an unattractive look. 

How Much Does It Usually Cost to Sealcoat a Driveway?

The average cost of sealing a driveway will vary depending on a variety of criteria, such as the size of the driveway, the condition of the surface, and the type of sealcoating material that is utilized. Sealcoating will cost anything from fifty cents to one and a half dollars per square foot, with the average price hovering around one dollar per square foot. 

Sealcoating can run anywhere from $400 to $1,200 for a conventional driveway that is 20 feet wide by 40 feet long (800 square feet), with an average price of roughly $800 for such a driveway. The driveway in question has an area of 800 square feet. Having said that, this is merely a ballpark figure. The precise amount will be determined by the status of your driveway and the services it requires. 

If you want to have a better idea of how much it will cost to seal coat your driveway, it is a good idea to acquire free estimates from many different contractors. Be sure to ask about the sort of seal coating material that will be used, as well as any additional services that may be included, such as crack repair or surface preparation, and don't forget to inquire about whether or not any of these things will be covered in the price. You will be able to discover the best deal for your money and ensure that you get the finest potential outcomes for your seal coating project installation if you get many quotations and compare them to one another.

Contact Information:

Del Rey Paving

,
United States

Guillermo Barajas
(310) 207-3737
https://delreypavinginc.com